Room temperature disintegration of mucosa PD1025

  • 产品详情

Structure:


Specification of the adhesive tape:



PET release film

0.1±0.005mm

The temperature at which viscosity begins to form

50℃

Applicable temperature

80℃↓

Desorption temperature

25℃↓




Feature:

Applicable to the cutting of MLCC ceramic chip capacitors

2. At room temperature, it has no viscosity.

3. The adhesion increases as the temperature rises.

After returning to room temperature, the adhesion is released. The effect becomes more pronounced as the temperature decreases.



Usage method:

①Remove the release film

② Place the membrane on the heating plate and heat it to 55-60℃.

③ Place the product on the membrane and use a rubber roller to roll it back and forth gently for 2 to 3 times.

④ Place the packaged products in a temperature-controlled area ranging from 60 to 90 degrees Celsius for operation.

⑤ After completing the work, place it in the room temperature area to cool down. It can be peeled off when the temperature is below 25℃. Place it at room temperature for the peeling operation.

This tape can be repeatedly heated and used (up to 3-8 times)